Static Type Voltage Stabilizer

Ultra Isolation Transformers
Ultra Isolation Transformers

Protection

  • setting Over Voltage Protection
  • setting Under Voltage Protection
  • setting Single Phasing Preventer
  • setting Phase Reversal Preventer
  • setting Short Circuit Protection

Control System

Plug in type Micro processor based control card for high reliability, accuracy & easy maintenance

MS Enclosure

Spacious pipe structure design duly powder coated for easy maintenance with wheels for smooth movement.

Display & Indication

  • VIF Indicator: This digital display gives the information of voltage, current and frequency of the all phase for both input and output.
  • Trip Indication: Trip indication for individual phases for both undervoltage and over voltage condition.
  • In Low or In High Voltage: Mains incoming indicator Neon lamp for all phase,
  • Error Loggings: Fault Error Log with Time & Date.

Technical Specification

ParametersSpecification
Rating10 KVA TO 300 KVA
Phase3 PHASE
Control TypeHigh Frequency 20 KHz IGBT driven Voltage Regulator/Convertor
Input Voltage Range340-480 v (Regularrange) can be customized as per requirement)
Output Voltage400 V AC
Voltage Regulation+/-1% at Full Load
Efficiency>97%
Input Frequency50Hz +/-6%
Wave FormSine wave
Effect of PowerfactorNil
DisplayLCD type
Rate of Correction4000 V/sec
Control SystemMicroprocessor Based Lcd Type Display Control System With Following Features
1) Plug in Type Control System for Easy Maintenance
2) Stop Key: to Switch Off O/p Load to Edit Selected Digit
3) Start Key: to Switch on O/p Load to Select the Digit
4) Menu Key: to View Parameters/ Settings
5) Log Key: to View Error Log for Calibration Purpose
Parameters List1) Output Voltage (L-l & L-n)
2) Input Voltage (L-l & L-n)
3) Load Current (R-y-b)
4) Frequency
5) Date
6) Time
7) System Status
Correction Time20 millisecond
Operating Temperature0°C to 55°C
Duty Cycle100% Continues
Nature of CoolingForced Air Cooled
Protections• Over voltage Protection • Under Voltage Protection • short-circuit Protection (Through MCCB at Input side) • Single Phasing Preventer • Phase Reversal Preventer (all protections are with 5-60 sec time delay) • Surge protection device (SPD)
Trip & RestartYes. Available
MCCB250 Amp MCCB of suitable Rating of 10kA at Input Side
Powder Coating ColorRAL 7032
TerminationInput & Output Termination Busbars
EarthingEarthing bolt will be provided
Indications• Input Normal LED • Output Normal LED • Phase Reverse LED • Overload LED
IP RatingIP 20
MovementWheels are provided for smooth movement
Cable GlandIndividual cable gland provided for Input & Output cable Entry

Products

Static Type Voltage Stabilizer

Static Type Voltage Stabilizer

Product Inquiry